References

• Support in defining, planning and establishing maintenance systems for railway vehicles
  

• Market analysis of a specific country including potential for sales of new rolling stock including business planning and start-up strategy
  
• Simulation of new maintenance infrastructure to determine number of pits, load and bottle necks
  
• Project support during planning and construction of new maintenance facility
  
• Evaluation of operation and failures of locomotives and elaboration of possible remedial actions
  
• Project support in modernisation of diesel locomotives

Planning support and project management for overowerhaul of multiple units

Consulting support Project rolling stock 2023

Project Planning for Service project in Scandinavia

WL tender support

Build Supervision and Integration services

EY DAC LCC Study

• FFG project Citybahn Waidhofen
  

• FFG project HYTRAIN

Market value appraisal 43 BR1144

Evaluation of the subsequent use of Laag's freight wagons

GATX Technical Appraisal and advisory Polish Loco Fleet

• On-site support for the Integral fleet
  

• ECM2 type support
  
• Integral fleet training
  
• Integral market value appraisal

Tender support hydrogen

JSC Metrowagonmash Expertise Metro Budapest

FPK Maintenance improvement consultancy

Tender Support

• SRS Project Planning
  

• Spare part GenSet ADY sleeping train
  
• SRS Reliability Fault Trees_Ramon_Lux

Feasibility of converting the Flirt WC for filling and emptying on both sides

Feasibility study traction form Pinzgauer Bahn

Availability of the NPZ fleet

Tender support 69 EMU Tender

Preliminary investigation of electrification

• Support in offer for Class 72 Norway Engineering Refurbishment
  

• Feasibility study support Diesel Genset 2,2 MW for Measuring train SAPSAN

Evaluation of the operation and maintenance of the Länderbahn

Market development support

Asset Evaluation and Inspection

RAMS report

Spare Parts VALE 101976, 111696

• Design supervision Integral and Talent 2018
  

• Design supervision Integral and Talent 2019 - 2024

Underframe battery box for multiple units

Certification Support gDFZ SBB

Electrical engineering (circuit technology, control cabinets, consoles) for DB project DO2010

• Entry plate heated 70 pieces
  

• NYCT Remodeling Services and Expenses

• SBB GFK Hood
  

• VVB EMS compliance support

Consulting Services Africa, CIS and Latin America

Concept shunter Russia

NSW AUSTRALIA Tender Support

CALTrain Tender Support

Tender Support New Trams Phase 2

Tendering support new hydrogen rolling stock

• Talent battery hybrid feasibility study
  

• Market value appraisal for passenger train

Technical Audit RZD HSR Moscow Kazan

Tender Support Tram Lugano

Feasibility study electrification ZVB

Railway standards relay support

Expert Testimoy

Support Hannover

Market value appraisal and feasibility study for sleeping cars and couchettes

Support in reliability improvement of electrical locomotives

Support in brake performance improvement of EMUs

Support in reliability improvement of DMUs

Support in performance and reliability improvement of a dump train and build supervision of a new dump train

Creation and update of operating books for the locomotive fleet

Build supervision of modernised Polish M62 locomotives which are being equipped with GE diesel engines

Training of train drivers for border traffic between Switzerland and Germany in Basel

Support in the homologation of modernised Polish M62 diesel locomotives

Tender support of new rolling stock acquisition for Airport Links in Moscow

Simulation of a new maintenance facility

Support in the set-up of a new maintenance facility in Hungary

Support in acquiring TRAXX-freight locomotives from Bombardier Transportation

• Analysis of the technical condition, operation and maintenance of diesel locomotives
  

• Support in defining and planning maintenance and inspection of railway vehicles

Project management for the new maintenance building

Training and examination of shunting locomotive drivers and workers

• Training of engine drivers for Swiss transit
  

• traffic

Training of engine drivers for boarder traffic Germany-Switzerland in Basel

Training of engine drivers for transit traffic

Project management: modernisation of railway passenger car

Project management of the retrofit of Integral DMUs

• Support Regensburg and MFM
  

• Lifecycle support

Training and examination of steam engine drivers and technical checks of steam locomotives and passenger coaches

Basic course “Historical railway in Switzerland”

Training of engine drivers for Swiss transit traffic

Training of engine drivers for boarder traffic Basel (Wheil on the Rhine to Basel RB)

Operating instructions and quality assurance documents for the ETCS-installation locomotives and control wagons of SBB

Project management of the modernization of passenger coaches

Fault- and order management system

Project management of the retrofit of the tilting bogies of the ICE-T of Deutsche Bahn

• Signalling system, centralized control system
  

• SCADA and telecom system

• Signalling system, centralized control system
  

• SCADA and telecom system

Wheel Weighing Facility

Bogie load test stand

Signalling, LZB and centralized control system

Support with the approval of TRAXX electric locomotives in Austria

Project support Brenner base tunnel

Service and support for HaslerRail products in Austria (sales and distribution)

Installation of mufflers

Support electrical engineering

Engineering and design of the mechanical part of narrow gauge control car and passen-ger coaches to be produced by ZOS Vrutky, Slovakia

Engineering and design of the mechanical part of narrow gauge control car and passen-ger coaches to be produced by ZOS Vrutky, Slovakia

• Frame contract for supporting ÖBB – Technical Services
  

• e.g. homologation management for freight wagons, problem analysis re HVAC of passenger cars, calculation of spring systems

System support Integral DMU

Engineering support

Engineering support maintenance train ÖBB

• Passenger carriage engineering
  

• Engineering support FLIXTRAIN 2021

IFE Engineering Support (USA)

• RfP - proposal engineering Support Flixtrainbis 06-12/2020
  

• RfP - engineering Support Concept design Flixtrain

• Siemens AT Engineering Support DANI
  

• Engineering circuit diagram for the ÖBB IC
  
• Circuit diagram coordination support IC

Requirements engineering and technical support Sourcing EMU Argentina

• Bogie frame FEA comparison (10300)
  

• 100 sets of APU components exhaust gas P2-P7
  
• Bogie validation
  
• Pakistan buffer 10 pieces
  
• Finland S-curve investigation
  
• GE Finland Coupler Platform
  
• WABTEC (GETP) Phase 2 re engineering Bogie Frame for 1524mm gauge
  
• Feasibility study Phase 1 Bogie Frame

• Engineering in 2020
  

• electrical engineering support

Feasibility of converting the Flirt WC for filling and emptying on both sides

Upgrade Mili Tren EMU 160 km / h to 225 km / h

Feasibility study traction form Pinzgauer Bahn

Availability of the NPZ fleet

ÖBB conversion of 22 couchette cars

OEBB BCC market value appraisal of double-decker multiple units

Preliminary investigation of electrification

Engineering Support

Engineering circuit diagram ÖBB-IC

Engineering on-board network design_ÖBB-IC

Support FXM & RAM in the metro area

Support in proposal process for Class 72 Norway Engineering Refurbishment

Feasibility study support Diesel Genset 2,2 MW for Measuring train SAPSAN

Engineering projects Bussnang

RAMS report

Technical supervision (Bauartbetreuung) Integral and Talent

Underframe battery box for multiple units

Certification Support gDFZ SBB

Electrical engineering (circuit technology, control cabinets, consoles) for DB project DO2010

• Entry plate heated 70 pieces
  

• NYCT Remodeling Services and Expenses

SBB GRP Hood

VVB EMS compliance support

Mechanical engineering support

Plasser DC-Box

E-traction Italy network

Engineering Support 2017

SwissRides HVAC-Engineering

Fire Protection Power Control and others

Knorr BremseGuard Panels

Lifecycle support 2017

• Talent battery hybrid feasibility study
  

• Market value appraisal for passenger train

BRACKETS for Pass Loco Bogie Set #1

Mechanical engineering for series 9 specifications TCD02-2014

Development of a hybrid drive concept with a pure electric drive for a track tamping machine

Development and engineerinof the GE APU for India

Car body crack repair

Flirt3 TEXRail

Support engineering service project Indian door EMU

Feasibility study electrification ZVB

Railway standards relay support

• Protective earthing concept, Brakes, springs, high voltage wiring and other services
  

• Support and FEM for bogie adaptation
  
• 6 Car body conversion, engineering of the GRP hood including fastening and MIBIS support
  
• FEM calculation of car body, MIBIS and hood design review

EMS Conversion of internal converter

X2 Driver Desk Change Request

Engineering for Refurbishment for special coach "Domecar"

Modernization of interior fittings ETR 500

Support in reliability improvement of electrical locomotives

Support in brake performance improvement of EMUs

Support in reliability improvement of DMUs

Support in performance and reliability improvement of a dump train and build supervision of a new dump train

Creation and update of operating books for the locomotive fleet

• Electrical engineering and system integration on diesel multiple units
  

• (End customer Tunisian Railways SNCFT)

Construction of aluminum car bodies for intercity trains

Build supervision of modernised Polish M62 locomotives which are being equipped with GE diesel engines

Training of train drivers for border traffic between Switzerland and Germany in Basel

Support in the homologation of modernised Polish M62 diesel locomotives

Simulation of a new maintenance facility

Support in the set-up of a new maintenance facility in Hungary

Support in the electrical engineering of EMUs

Support in acquiring TRAXX-freight locomotives from Bombardier Transportation

• Analysis of the technical condition, operation and maintenance of diesel locomotives
  

• Support in defining and planning maintenance and inspection of railway vehicles

• Maintenance system Integral
  

• Maintenance software

• Support Regensburg and MFM
  

• Lifecycle support

Operating instructions and quality assurance documents for the ETCS-installation locomotives and control wagons of SBB

Project management of the modernization of passenger coaches

Fault- and order management system

Project management of the retrofit of the tilting bogies of the ICE-T of Deutsche Bahn

• Signalling system, centralized control system
  

• SCADA and telecom system

• Signalling system, centralized control system
  

• SCADA and telecom system

Wheel Weighing Facility

Bogie load test stand

Signalling, LZB and centralized control system

Support with the approval of TRAXX electric locomotives in Austria

Engineering, RAMS analysis, T&C support and EMC management for Monorail Mumbai

Design of car body, acoustic analysis, bogie bolster and technical support Intercity project

Electrical engineering and system integration for monorail vehicles, Kuala Lumpur 2 project

System engineering, acoustic analysis for DMU

System integration of RBL, video and fire pro-tection system for DMU

Engineering of engine room and traction equipment for double-deck for S-Bahn Zurich

Engineering and retrofit of vehicle interfaces and public-address system for 5090 series

• Design support for parts of gas engine
  

• Design support for genset-units

Rapid Prototyping for locomotive type ES64U4 (Austrian Federal Railways 1216) Taurus

Design and delivery of generator-sets for pow-er supply for railway passenger cars for Israel Railways (in collaboration with Hitzinger, Linz and Zeppelin, Fischamend)

• Design of parts (underframe, pneumatics) of the „Railjet“-project (end-customer ÖBB)
  

• with the CAD-system ProEngineer

Service and support for HaslerRail products in Austria (sales and distribution)

Installation of mufflers

Support electrical engineering

Engineering and design of the mechanical part of narrow gauge control car and passen-ger coaches to be produced by ZOS Vrutky, Slovakia

Engineering and design of the mechanical part of narrow gauge control car and passen-ger coaches to be produced by ZOS Vrutky, Slovakia

• Frame contract for supporting ÖBB – Technical Services
  

• e.g. homologation management for freight wagons, problem analysis re HVAC of passenger cars, calculation of spring systems

System support Integral DMU

• Development of parts of a locomotive diesel engine
  

• Service and support for construction of gas conditioning facilities

Development and technical support of Integral DMU

Engineering, design, commissioning and manufacturing support of couchette wagon retrofit for SBB

Engineering and design of passenger coaches Ampz and Bmz for CD

Engineering and design under frame container

Engineering and design of a rail milling machine

Engineering and design of a activated carbon filter

Engineering and design of a exhaust gas cleaning facility

Engineering and design of diesel engine com-ponents

Engineering and design test stand mechanical Drive

Concept for the retrofit of EMUs

Concept for the exchange of the engines of the diesel locomotive DH 400

Track works engine, installation of Indusi PZB

Modernization of the locomotive control for a rail milling machine

Engineering, design, commissioning and manufacturing support of Integral DMUs

Engineering, design, commissioning and manufacturing support of diesel locomotive type 2068

Engineering, design, commissioning and manufacturing support of DMU type 5047 / 5147

Engineering, design, commissioning and manufacturing support of RIC-passenger coaches Bcmz

Engineering, design, commissioning and manufacturing support of RIC-passenger coaches Bmpz

Engineering, design, commissioning and manufacturing support of RIC-passenger coaches BDmpsz

Engineering, design, commissioning and manufacturing support of an electrotechnical measuring wagon

Engineering, design, commissioning and manufacturing support of track work measur-ing wagon

Engineering and design of double deck pas-senger coaches

Retrofit of a remote control diesel locomotive

Engineering and design of a modified DMU type 5047 / 5147

Engineering and design of a modified DMU type 5147

Engineering, design, commissioning and manufacturing support of 3-wagon EMU’s

Engineering and design of a track cleaning vehicle

Engineering and design of a diesel Metro lo-comotive

Engineering and design of the mechanical part of a battery driven Metro locomotive

Engineering and design of the mechanical part of narrow gauge EMU

Engineering and design of the mechanical part of narrow gauge EMU

Engineering and design of a modified DMU type 5047 / 5147

Engineering and design of 2-axle sliding door freight wagon type Himrrs

Engineering and design of 4-axle freight wag-on Sgjns

Engineering and design of 4-axle car transport wagon DDm

Engineering and design of a coal mine loco-motive DH 80 G8

Engineering and design of a coal mine loco-motive DH 200 G22

Engineering and design of a shunting locomo-tive DH 340 B36

Engineering and design of a explosion proof shunting locomotive DH 300 B42ex

FFF-development project „Rolling Shelf“

FFF-develoment project „Schienenschallabsorber / Rollgeräuschreduzierung“

FFF- develoment project „SYSNOISE-Luftschallabstrahlung“

FFF- develoment project „S3L-Einachsfahrwerk“

Engineering support maintenance train ÖBB

Consulting support Project rolling stock 2023

EY DAC LCC Study

• FFG project Citybahn Waidhofen
  

• FFG project HYTRAIN

Evaluation of the subsequent use of Laag's freight wagons

Tender support hydrogen

Feasibility of converting the Flirt WC for filling and emptying on both sides

Upgrade Mili Tren EMU 160 km / h to 225 km / h

Feasibility study traction form Pinzgauer Bahn

Preliminary investigation of electrification

Feasibility study support Diesel Genset 2,2 MW for an inspection train based on SAPSAN / Velaro RUS configuration

Underframe battery box for multiple units

Certification Support gDFZ SBB

Electrical engineering (circuit technology, control cabinets, consoles) for DB project DO2010

NYCT heated floor refurbishment services

VVB EMS compliance support

Plasser DC-Box and E-traction for Italian network

• Engineering of HVAC and
  

• Fire Protection Power Control

• Talent battery hybrid feasibility study
  

• Market value appraisal for passenger train

Development and delivery of prototype of a hybrid drive concept with a pure electric drive for a track tamping machine

GE APU for India

Technical Audit of rolling stock requirements for Russian Railways High Speed Line Moscow Kazan

Support engineering service project Indian door EMU

Feasibility study electrification ZVB

Market value appraisal and feasibility study for sleeping cars and couchettes

• Protective earthing concept, Brakes, springs, high voltage wiring and other services
  

• Support and FEM for bogie adaptation
  
• 6 Car body conversion, engineering of the GRP hood including fastening and MIBIS support
  
• FEM calculation of car body, MIBIS and hood design review

EMS Conversion of internal converter

Refurbishment for special car "Domecar"

Modernization of interior fittings ETR 500

Support in reliability improvement of electrical locomotives

Support in brake performance improvement of EMUs

Support in reliability improvement of DMUs

Support in performance and reliability improvement of a dump train and build supervision of a new dump train

• Electrical engineering and system integration on diesel multiple units
  

• (End customer Tunisian Railways SNCFT)

Construction of aluminum car bodies for intercity trains

Simulation of a new maintenance facility

Support in the set-up of a new maintenance facility in Hungary

Operating instructions and quality assurance documents for the ETCS-installation locomotives and control wagons of SBB

Project management of the retrofit of the tilting bogies of the ICE-T of Deutsche Bahn

Engineering, RAMS analysis, T&C support and EMC management for Monorail Mumbai

Design of car body, acoustic analysis, bogie bolster and technical support Intercity project

Electrical engineering and system integration for monorail vehicles, Kuala Lumpur 2 project

Rapid Prototyping for locomotive type ES64U4 (Austrian Federal Railways 1216) Taurus

Design and delivery of generator-sets for power supply for railway passenger cars for Israel Railways (in collaboration with Hitzinger, Linz and Zeppelin, Fischamend)

Engineering and design of a rail milling machine

Engineering and design of an activated carbon filter

Engineering and design of an exhaust gas cleaning facility

Track works engine, installation of Indusi PZB

Modernization of the locomotive control for a rail milling machine

Engineering, design, commissioning and manufacturing support of Integral DMUs

FFF-development project „Rolling Shelf“

FFF-develoment project „Schienenschallabsorber / Rollgeräuschreduzierung“

FFF- develoment project „SYSNOISE-Luftschallabstrahlung“

FFF- develoment project „S3L-Einachsfahrwerk“

• APU Harness and Cable KIts 25 p.
  

• APU Exhaust parts

spare Parts

LEONI cable for APU

LKZ Parts contract 5 (Brackets, Sleeves and Bolts) for 2020ff 15 Locomotives

• APU 50 partial kits APU307-356
  

• MRIndia 10306 Spare parts P14, P18
  
• Spare parts P15, P16 and P19

Spare Parts

Window frame

Delivery genset and sliding step ARGE

• Bogie frame FEA comparison (10300)
  

• 100 sets of APU components exhaust gas P2-P7
  
• Bogie validation
  
• Pakistan buffer 10 pieces
  
• Finland S-curve investigation
  
• GE Finland Coupler Platform
  
• WABTEC (GETP) Phase 2 re engineering Bogie Frame for 1524mm gauge
  
• Feasibility study Phase 1 Bogie Frame

ÖBB conversion of 22 couchette cars

LKZ Parts (Brackets, Sleeves and Bolts) for 2018 10 Locomotives

• Anticlimber left 15 pieces 84D73487AGG1
  

• 11x Anticlimber weld right
  
• Draw Hook Beam 84D734870AFP1
  
• APU spare parts Engine Air Filter P13 704 pieces APU
  
• APU spare parts Engine Fuel Filter APU 957 pieces
  
• APU spare parts Engine oil filter P11
  
• 4 Draw Hook Beam 84D734870AFP1
  
• 10235 Anticlimber 4 links und 4 rechts
  
• Buffer Assemblies 48 Stück 84D734870G1
  
• Anticlimber right/left 84D734870AHG1 5 pieces; spare Parts
  
• 10 units Draw Hook Beam 84D734870AFP1
  
• 4 Anticlimber weld left 84D734870AGG1
  
• 100 sets of APU components exhaust gas P2-P7
  
• 56 draw hooks and 18 screw couplings ne APU for ICAT Testing
  
• another 44 screw couplings P115
  
• 52 Drawbars

Spare Parts VALE 101976, 111696

Underframe battery box for multiple units

• Entry plate heated 70 pieces
  

• NYCT Remodeling Services and Expenses

• SBB GFK Hood
  

• VVB EMS compliance support

• BRACKETS for Pass Loco Bogie Set #1
  

• LKZ Parts (Brackets, Sleeves and Bolts) for 2018 12 Locomotives

• Plasser DC-Box
  

• E-traction Italy network

• Units Buffer Assemblies 2017
  

• 100 sets of APU components exhaust gas P2-P7
  
• GE sleeves Batch 4

Knorr BremseGuard Panels

Sleeves and Bolts for LKZ

BRACKETS for Pass Loco Bogie Set #1

Development and delivery of prototype of a hybrid drive concept with a pure electric drive for a track tamping machine

• GE sleeves and bolt traction links Batch 1-3, Technical support LKZ, COLAS Spare parts, Spare parts Draw Hook Beam,
  

• GE APU for India
  
• Buffer Assembly AU10213
  
• Pakistan Buffers

• Roof hood
  

• DGFZ box conversion

Car body crack repair

Spare Parts VALE

EMS Conversion of internal converter

Engineering and delievry of prototype of the X2 Driver Desk Change Request

Pakistan Coupling Parts AU10216

Refurbishment for special car "Domecar"

Construction of aluminum car bodies for intercity trains

• Maintenance system Integral
  

• Maintenance software

Wheel Weighing Facility

Bogie load test stand

Engineering and retrofit of vehicle interfaces and public-address system for 5090 series

Rapid Prototyping for locomotive type ES64U4 (Austrian Federal Railways 1216) Taurus

Design and delivery of generator-sets for pow-er supply for railway passenger cars for Israel Railways (in collaboration with Hitzinger, Linz and Zeppelin, Fischamend)

Installation of mufflers

System support Integral DMU

Development and technical support of Integral DMU

Engineering, design, commissioning and manufacturing support of couchette wagon retrofit for SBB

Engineering and design of passenger coaches Ampz and Bmz for CD

Engineering and design under frame container

Engineering and design of a rail milling machine

Engineering and design of a activated carbon filter

Engineering and design of a exhaust gas cleaning facility

Engineering and design of diesel engine com-ponents

Engineering and design test stand mechanical Drive

Concept for the retrofit of EMUs

Concept for the exchange of the engines of the diesel locomotive DH 400

Track works engine, installation of Indusi PZB

Modernization of the locomotive control for a rail milling machine

Engineering, design, commissioning and manufacturing support of Integral DMUs

Engineering, design, commissioning and manufacturing support of diesel locomotive type 2068

Engineering, design, commissioning and manufacturing support of DMU type 5047 / 5147

Engineering, design, commissioning and manufacturing support of RIC-passenger coaches Bcmz

Engineering, design, commissioning and manufacturing support of RIC-passenger coaches Bmpz

Engineering, design, commissioning and manufacturing support of RIC-passenger coaches BDmpsz

Engineering, design, commissioning and manufacturing support of an electrotechnical measuring wagon

Engineering, design, commissioning and manufacturing support of track work measur-ing wagon

Engineering and design of double deck pas-senger coaches

Retrofit of a remote control diesel locomotive

Engineering and design of a modified DMU type 5047 / 5147

Engineering and design of a modified DMU type 5147

Engineering, design, commissioning and manufacturing support of 3-wagon EMU’s

Engineering and design of a track cleaning vehicle

Engineering and design of a diesel Metro lo-comotive

Engineering and design of the mechanical part of a battery driven Metro locomotive

Engineering and design of the mechanical part of narrow gauge EMU

Engineering and design of the mechanical part of narrow gauge EMU

Engineering and design of a modified DMU type 5047 / 5147

Engineering and design of 2-axle sliding door freight wagon type Himrrs

Engineering and design of 4-axle freight wag-on Sgjns

Engineering and design of 4-axle car transport wagon DDm

Engineering and design of a coal mine loco-motive DH 80 G8

Engineering and design of a coal mine loco-motive DH 200 G22

Engineering and design of a shunting locomo-tive DH 340 B36

Engineering and design of a explosion proof shunting locomotive DH 300 B42ex

• Delivery of cpl. Gen sets for train power supply
  

• End customer VALE, Brazil

Delivery of power switch cabinets for auxiliary equipment

Delivery of universal auxiliary bogies for the maintenance workshop

Delivery of hydraulically driven swiveling steps for the RZD sleeping car project

• Delivery of bogie frames for freight train locomotives
  

• End customer Freightliner, UK

• Delivery of bogie frames for passenger locomotives
  

• End customer of the Kazak State Railways

• Delivery of cast bogie parts for passenger locomotives
  

• End customer of the Kazak State Railways

Depot Modernization Support and PM

Delivery of components for crash fronts according to EN 15227 for freight train locomotives, end customer Freightliner, UK

Coupling parts and buffers for 55 locomotives for Pakistan

Delivery of 100 auxiliary power units (APU) for the Indian diesel locomotive WDG-4G

Delivery of replacement wheelsets

Factory acceptance of wheels

Support with the purchase and conversion of diesel locomotives for SRO

• Erstellung Ersatzteilkatalog, Ersatzteil-Preisbeschaffung,
  

• Anforderungskatalog

Fleet management for the BR 429 series (FLIRT)

Project management, build supervison and acceptance of ERTMS-upgraded multisystem locomotives

Support in improving the reliability of electric locomotives

Expertise regarding market price, current value and evaluation of the technology of a self-discharge train

Project management for the introduction / conversion of EMS to freight locomotives

Asset evaluation and market price evaluation according to the remaining service life

Study for future vehicle concepts for the Mariazellerbahn, Austria (ÖBB)

Final Assembly of 150 container freight cars type Sggrs for German end customer

Final Assembly of 150 container freight cars type Sggrs for German end customer

• Manufacturing of H-Bahn no. 5 vehicle
  

• type Dortmund 2

• Manufacturing of a H-Bahn vehicle type
  

• Dortmund 2

• Trams for Stockholm (Sweden)
  

• Manufacturing of 5 cars

• Low floor regional train
  

• "PROTOS®", 160 km / h
  
• Development, design and manufacturing
  
• of 5 2-part multiple unit trains

• Manufacturing of a H-Bahn vehicle type
  

• Dortmund 2

• Light Innovative Regional Express
  

• (LiREx®), 6-section train
  
• Car body and drive systems
  
• development & construction incl.
  
• integration of windows and doors,
  
• production of the DMU prototype

• Express train "Metropolitan", 220 km / h
  

• Technical project management and
  
• development, design, manufacturing of
  
• 12 passenger carriages and 2 control
  
• cars (2 trains)

• Prototype and pre-series of the
  

• BR 670 double decker railbus
  
• Project co-ordination, development,
  
• design and manufacturing of the preseries
  
• of 6 cars

• Manufacturing
  

• Flat wagon to transport slag dump for
  
• ThyssenKrupp
  
• 20 km / h
  
• 15 trailer cars

• Car transport wagon
  

• Development, design and
  
• manufacturing of 2 prototypes

• Manufacturing
  

• Sliding wall goods wagons, 2x2 axles
  
• 32 trailer cars

• Tipping buckets wagon Faln 128
  

• Manufacturing of 330 wagons

• Modern special goods wagon IGW
  

• Project coordination, development,
  
• design and manufacturing of the preseries
  
• of 10 cars

• Tram carriages
  

• 2-car units for ÜSTRA Hannover
  
• Manufacturing

• Production
  

• Locomotive boxes incl. Roof segments for
  
• Rhaetian Railway
  
• 80 km / h
  
• 4 vehicles (motor cars)

Painted carbody-bodyshell NF

• Base frames and portals Bern XL
  

• Manufacturing of 21 7-part units

• Underframes ET 474
  

• Drive car
  
• Manufacturing

• Transrapid TR 09
  

• Sub-assemblies for carriages
  
• Design and manufacturing

• Tram carriages
  

• 3- and 5-car units for Karlsruhe
  
• 2-car units for Stuttgart
  
• Manufacturing

• Welded aluminum underframe module
  

• for low-floor city tram Combino
  
• Manufacturing

• Subassemblies for carriages
  

• GT6 - Jena
  
• Manufacturing

• Aluminum / steel loco-roof for DB AG -
  

• BR 185, New Jersey Transit,
  
• Design and series production

• Aluminum / steel loco-roof for DB AG -
  

• BR 101, 145, 152, OSE
  
• Manufacturing

• Magdeburg trams
  

• stainless steel passenger carriages,
  
• 25 three-section units
  
• Design and manufacturing

• Driver’s cab complete module
  

• rolling stock BR ​​711.1
  
• Development, design and manufacturing
  
• of 44 cabs - fully developed

• Driver’s cab complete module and Inter
  

• mediate ends (IME) for Metro
  
• Guangzhou
  
• Manufacturing of 4 driver’s cab complete
  
• modules and 2 modules as kits
  
• (Prototyping)

• Driver’s cab complete module for light
  

• railway NGT 6 Dessau
  
• Development, design and manufacturing
  
• of 10 kits (heck and drive cabs)

• Reconstruction / modernisation of
  

• the double decker control car
  
• DABbuz778
  
• Development, design and manufacturing
  
• of 102 driver’s cabs

• Cargo sprinter cab – complete module
  

• Development, design and manufacturing
  
• of a pre-series of 6 cabs

• Aluminum cab for VT 611
  

• Manufacturing of 100 cabs

• Manufacturing
  

• Local train
  
• Various welded assemblies for Rennes B
  
• 120km/h
  
• 10 assemblies = 10 trains

• Manufacturing
  

• Local train
  
• Various welded assemblies incl. mechanical processing for SWT City
  
• 120km/h
  
• 100 assemblies = 50 trains

• Manufacturing
  

• Multiple unit Velaro
  
• Various welded assemblies incl. mechanical processing
  
• 200km/h
  
• 100 assemblies = 50 trains

• Welded sub-assemblies incl. mechanical
  

• processing for DML ÖBB
  
• 160 km/h
  
• 150 assemblies = 50 trains

• Manufacturing
  

• Tram
  
• Crashmoduls for Avenio
  
• 80 km/h
  
• 80 assemblies = 40 trains

• Manufacturing
  

• Freight wagon subassemblies for CargoBeamer
  
• 120 km/h
  
• 40 assemblies = 20 Trailercars

• Manufacturing
  

• Bogieframes for Kazakhstan
  
• 120 km/h
  
• 4 assemblies = 2 trains

• Manufacturing
  

• Bogieframes and crashboxes
  
• 120 km/h
  
• 10 assemblies = 5 trains

• Manufacturing
  

• Freight wagon
  
• Assemblies for CargoBeamer
  
• 120 km/h
  
• 30 assemblies = 16 trains

• Manufacturing
  

• Local train
  
• Processing of various welded assemblies incl. mechanical processing for Velaro RUS / Sotschi
  
• 120 km/h

• Coupler head for Metro Oslo
  

• Manufacturing car parts
  
• Climated rooftops for Metro Oslo
  
• Clevises for Metro Oslo
  
• 120 km/h
  
• 100 assemblies = 20 trains

• Manufacturing
  

• Tram
  
• Trailer bogies for trams
  
• 60km/h
  
• 80 bogies = 20 trains

• Electrical installation and assembly of H-Bahn no. 5 vehicle
  

• type Dortmund 2

• Electrical installation and assembly of a H-Bahn vehicle type
  

• Dortmund 2

• Development, design and manufacturing
  

• Tram
  
• Door module, double-leaf for Tram B
  
• 60 km/h
  
• 90 pcs. Door modules = 15 Trams

• Development, design and manufacturing
  

• Tram
  
• Door module, double-leaf for Tram B
  
• 60 km/h
  
• 90 pcs. Door modules = 15 Trams

• Manufacturing
  

• Multiple unit regional trains
  
• Drive system for DMU
  
• 100km/ h

• Development and manufacturing
  

• Multiple unit regional trains
  
• Drive system for DH4 – 1 Iran
  
• 120 ready to install Systems = 40 Trains

• Development and manufacturing
  

• Multiple unit regional trains
  
• Drive system for VT 612
  
• 120 km/ h
  
• 430 ready to install Systems = 215 Trains

• Development and manufacturing
  

• Multiple unit regional trains VT 642 Desiro
  
• Support unit for drive system
  
• 120 km/ h
  
• 800 modules = 400 Trains

• Development and manufacturing
  

• Local train
  
• MultiDrive unit “TALENT” BM 93 for Norwegian national Railway (NSB)
  
• 120 km/ h
  
• 32 modules = 16 Trains

Interior

• Refurbish of Trams
  

• B-Wagon GT 10 NC DU
  
• 6 Trams 4 parted

• Accident repairs of trams
  

• 2 Trams 3 parted
  
• Typs NGT 1316 and
  
• NGT 8D1373

• Accident repairs of trams
  

• 2 Trams 3 parted
  
• Typs NGT 6-DD
  
• NGT D8-DD

• General inspection of two funicular incl. bogies
  

• 2 wagons

• Accident repairs
  

• Tram
  
• 1 Tram 3 parted

• Repair service of railcar bodies Metro Berlin
  

• Serie F84- F92
  
• 20 Trains 2 parted

• Overhaul service of corrosion damages on passenger carriages
  

• 4 Wagons

• Diagnosing, overhauling,
  

• new construction of drive systems VT
  
• 612

• Maintenance of the heavy duty
  

• transporter (NCS)
  
• Uaai 839, 810, 755, 754
  
• 4 Wagons

• Accident overhauling
  

• Trams
  
• 1 tram 3 parted

Weld repairs on existing locomotives

Weld repairs on existing locomotives

Noise abatement freight wagons

Turn key project light rail network in Cochabamba, Bolivia

Sub EPC in the project AKH Awash-Weldia project in Ethiopia - Infrastructure for ERC project Phase 1 and Phase 2

• Sub EPC in the project AKH Awash-Weldia project in Ethiopia
  

• Kombolcha Workshop for ERC
  
• Training and Commissioning Workshop equipment
  
• Installation workshop machines
  
• Subsequent delivery of maintenance equipment

Subcontractor in the project Highway Ankara-Nigde, Turkey

Onshore Construction and Engineering works Ankara Nigde Highway

Build Supervision for the Kozzika Yard project for the Metro Cairo

Build Supervision for the Kozzika Yard project for the Metro Cairo

Depot Modernization Support and PM

Consulting on decision of maintenance site